The SAM2-180 two-speed pump is used in Teuco and Spaform spas, among other brands. Simaco pumps are particularly notable for their quietness.
Please note that a new version of this pump is now manufactured by Simaco, and it is no longer possible to turn the wet end at 45. Please do not hesitate to contact us if you have any replacement problems.
We also offer the slightly more powerful Simaco SAM2-200 two-speed model.
Dimensions (without the unions)Length: 336 mm
Width: 193 mm
Height: 228 mm
Technical specificationsPower high speed: 1.9 kW
Power low speed: 0,4 kW
Flow rate high speed: 600 litres/minute
Flow rate low speed: 320 litres/minute
Wet End Orientation
The wet end orientation of the Simaco SAM2-180 can be standard or configured with a 90 outlet to the right or left. However, this model is not available with a 45 outlet and is therefore unsuitable as a replacement for the previous SAM2-180 model, specifically designed with this inclination.
Pipe connectionsMale threaded with a 63 mm external diameter.
The Simaco SAM2-200 pump is supplied with pump unions (and gaskets) for 50 mm pipes. A single nut to be used with a 2-inch exit or a 63 mm exit is also available. Don’t forget the gasket !
Cable and plug The pump is supplied with a cable of about 120 cm, and pre-cabled. If you are replacing an existing pump, you may be able to re-use your existing power cord. There is a wiring diagram for connecting it up on the inside of the cover of the water-resistant electrical box.
You can also choose to have it pre-cabled by our team with n AMP plug, a mini J&J plug or an in.link plug (length 100 cm).
Warranty
2-year Tubs Parts warranty
Part numbers
Simaco: SAM2-180 2/4
Esta bomba no puede sustituir al modelo SAM2-180 con un ngulo de descarga de 45.
Valoraciones
No hay valoraciones aún.